Another little step-by-step photo collection of a mould for the BJD wheelchair. In this case, the centre piece that hides the nut with which the back wheel is held onto the frame. Sort of like a hubcap.
“Read” from top to bottom and from left to right.
1- Original, bottom. 2- Preparing the mould, set-up 3- Silicone casting 4- Finished first half of the mould 5- Flipped over 6- Removing the blockage 7- Re-encapsulating the mould, insulating the parts where the two silicone halves will touch with Vaseline 8- Casting second half of the mould 9- Finished mould next to original
#BJDwheelchair #moldmaking #mouldmaking #silicone #PuppitProductions #prototyping
Update: Finished cast resin replica!
The mould is perfect, there’s hardly even any seamlines to sand.
#resincasting #PU-resinGif Click Bjd Wheelchair Workshop Shots Puppit Productions